Development and sales of gel products.
Prototypes available from one piece.

Fall prevention sheet for earthquake countermeasures

Gel tack sheet is a strong adhesive gel with a unique formulation that enhances the self-adhesive properties of urethane.
It is useful for preventing factory equipment, office equipment, filing cabinets, furniture, etc. from falling over.
Ideal for those with the following concerns.

･Earthquake resistance measures are insufficient, but I don’t know where to start.
･I want to do something about earthquake-proofing of factory machinery and measuring equipment.
･I want to prevent shelves, TVs, computers, etc. from falling over.

Features

Strong adhesive gel sheet

Strong adhesive gel sheet with excellent vibration and shock absorption properties.
Since the material does not contain plasticizers, it does not cause bleed phenomena such as staining of contact surfaces.

Ideal for earthquake protection

It is ideal for preventing shelves, TVs, equipment, etc. from falling over, and can also be used for temporary fixation or as a suction pad.
The self-adhesive property of urethane gel makes it possible to apply and remove the sheet.

Can be used repeatedly

If it gets dirty, you can wash it off with water, and once it dries the adhesive power will be restored so you can use it repeatedly.

Check out the video

Test results

■ Frequency characteristics

■ Comparison of adhesive force (90°peel)

■ Shock absorption properties

*The values in the graph are for reference only and do not guarantee the characteristics.

How to use

How to install

1.Clean the installation surface.

2.Cut to your desired size with scissors or roller cutter.
*Sheets thicker than 3mm are difficult to cut, so we recommend using a roller cutter. We can also handle cutting services.

3.Remove the film from both sides of the sheet.

4.It is placed between the object you want to prevent from falling and the surface on which it is installed, such as the floor or a desk.

Precautions

*The gel may lose its adhesiveness if it becomes wet. Avoid using it in places where it may get wet.
*When installing, place the gel so that the force is applied evenly to the four corners or several places on the bottom surface.
*Walls and vertical surfaces are more likely to peel off due to its stick-on/peel-off characteristics.
*It may become difficult to remove if used for a long period of time.
*When peeling off the gel, the paint or other materials on the installation surface may peel off if the gel is pulled strongly.
*Please avoid using on soft PVC or materials that contain a lot of plasticizers.
*Please use the product on a flat surface both on the bottom and on the installation surface so that the load is applied to the entire surface of the gel.
*This product cannot be used on water-repellent materials.
*This product is intended to reduce damage from earthquakes. We are not responsible for any damage or loss caused by the use of this product.
*Please use indoors away from direct sunlight.
*This product is not edible.
*Please keep this product out of reach of children.

■ How to remove the gel

*When peeling off, pinch the edge of the gel and pull it out slowly.
*If it is difficult to remove, wet a thin plastic card or similar and slowly insert it between the gel and the installation surface. The adhesive will be weaker in areas with moisture, making it easier to remove.
*After removal, depending on the material, there may be a difference between the installation location and the surrounding area.

Customers' opinions

We have completed earthquake resistance measures for factory machinery and measuring equipment!

I was looking for an easy earthquake-proofing item. We put sheets under factory machines and measuring instruments to make them earthquake-proof. Gel tack sheet was easy to handle because they can be applied and removed.

It is useful as an earthquake countermeasure to prevent falls inside the house!

I purchased this after watching a video of a test that recreated the magnitude 9 earthquake waves from the Great East Japan Earthquake. I was surprised that it didn’t fall over even with that much shaking. I use it under bookshelves and furniture in my house. I can cut the sheets myself, so I can use them according to the location.

It is safe even in places where it comes in contact with food!

Gel tack sheet is a material that conforms to the Food Sanitation Law and container and packaging standards, so it can be used safely even when it comes into direct contact with food.

They even provided cutting services!

I wanted a non-standard size, and I was hesitant because it would be difficult to cut the thick sheet myself, but I was glad I could have it cut to the size I needed.

Lineup

Gel tack sheet

Part Number	Size(mm)	Thickness(mm)	Hardness
GT01-22001	500×500	1.0	Asker C23
GT01-22002		2.0
GT01-22003		3.0
GT01-22004		5.0

Gel tack sheet with adhesive

Part Number	Size(mm)	Thickness(mm)	Hardness
GT01-22005	500×400	1.0	Asker C23

Gel tack sheet cutting type

Part Number	Size(mm)	Thickness(mm)	Hardness
GT01-22006	100×100	2.0	Asker C23
GT01-22007	250×250
GT01-22008	500×250
GT01-22009	100×100	3.0
GT01-22010	250×250
GT01-22011	500×250
GT01-22012	100×100	5.0
GT01-22013	250×250
GT01-22014	500×250

Gel tack square type

Part Number	Size(mm)	Thickness (mm)	Hardness	Proper load (per 1 pc)	Quantity per pack
GT01-22015	20×20	2.0	Asker C23	2.5kg	100
GT01-22016	30×30			5.0kg	42
GT01-22017	40×40			9.0kg	25
GT01-22018	50×50			15.0kg	16
GT01-22019	60×60			21.0kg	9
GT01-22020	80×80			38.0kg	4
GT01-22021	20×20	5.0		3.5kg	81
GT01-22022	30×30			8.0kg	42
GT01-22023	40×40			15.0kg	25
GT01-22024	50×50			22.5kg	16
GT01-22025	60×60			32.0kg	9
GT01-22026	80×80			57.0kg	4

Gel tack round type

Part Number	Size(mm)	Thickness (mm)	Hardness	Proper load (per 1 pc)	Quantity per pack
GT01-22027	Φ20	2.0	Asker C23	2.0kg	100
GT01-22028	Φ30			4.0kg	49
GT01-22029	Φ40			7.0kg	25
GT01-22030	Φ50			11.0kg	16
GT01-22031	Φ60			17.0kg	9
GT01-22032	Φ80			30.0kg	5
GT01-22033	Φ100			47.0kg	4
GT01-22034	Φ20	5.0		3.0kg	81
GT01-22035	Φ30			6.0kg	36
GT01-22036	Φ40			11.0kg	25
GT01-22037	Φ50			17.0kg	16
GT01-22038	Φ60			25.0kg	9
GT01-22039	Φ80			45.0kg	5
GT01-22040	Φ100			70.0kg	4

Fall prevention sheet

Part Number	Size(mm)	Thickness (mm)	Hardness	Proper load (per 1 pc)	Quantity per pack
GT01-22041	20×20	2.0	Asker C23	2.5kg	24
GT01-22042	100×100			60.0kg	1
GT01-22043	Φ40			7.0kg	4
GT01-22044	40×40	5.0		15.0kg	4
GT01-22045	50×50			22.5kg	4
GT01-22046	100×100			90.0kg	1

FAQ

What should I do if the sheet gets dirty?　

If the sheet becomes dirty with dust or other particles, you can wash it off with water. After it dries, you can reinstall it and use it again.

Can I cut the sheets myself?

It can be cut with scissors or a roller cutter. 3mm or thicker sheets are difficult to cut, so we recommend using a roller cutter. We also offer cutting services.