
Adhesive mat that removes 90% or more of dust and debris from shoe soles
Since it can be washed with water and used repeatedly, contributing to a significant reduction in running costs and waste.
Ideal for those with the following concerns.
- ・We are working on measures to prevent foreign matter contamination, but is plagued by complaints of hair and dust contamination.
- ・There are concerns about sanitation because rules regarding adhesive mats, such as how often mats should be peeled off and replaced, are not being followed.
- ・We want to work on the SDGs, but none of them are large enough to get started.
- ・We want to show that we are working on foreign material contamination in our audits!
Features

High removal rate mats of 90% or more
Measuring instrument: Kikkoman BioChemifa LumiTester
Test description: Walk indoors for one minute and measure the contaminants on the soles of the shoes. Then they walked three steps on each mat and measured the contaminants left on the soles of their shoes again.
Adhesion test results | Number of washings | ||||
---|---|---|---|---|---|
1 time | 25 times | 50 times | 75 times | 100 times | |
Adhesive strength | 0.48N | 0.68N | 0.68N | 0.65N | 0.67N |
Removal rate test results | Number of washings | ||||
---|---|---|---|---|---|
1 time | 25 times | 50 times | 75 times | 100 times | |
Removal rate | 90% or more | 90% or more | 90% or more | 90% or more | 90% or more |
Test method: Adhesion test at 90°peel / ATP(+AMP) wipe-off test
Measuring instruments: Nidec Simpo Force Gauge / Kikkoman BioChemifa LumiTester
Test description: Washing was repeated 100 times. The adhesive strength and removal rate were tested at 1/25/50/75/100 times.

Can be used repeatedly
When the adhesive strength decreases due to dirt, wipe the surface of the mat with special detergent or water to clean off the dirt and restore the adhesive strength for repeated use.
*If the number of traffic is high, the clean effect can be sustained by increasing the frequency of cleaning or by increasing the area of the installation.




Contains antibacterial, anti-mold, and flame retardant agents
The mat material contains antibacterial, anti-fungal, and flame retardant agents. It can also be used safely in food and pharmaceutical plants where mold growth is a concern.
It is also a product equivalent to the UL94 V-2 flame retardant standard.
Can be laid over the entire floor

Check out the video
Location of use
It can be used in places where hair and dust can be brought in.
Installation in the path of lightweight carts, which was difficult with conventional adhesive mats, and installation over the entire floor are possible.

Dressing room

Hand-wash facilities

In air shower

In front of clean area

Pre-cleanroom

Aisle of lightweight carts
It is effective when installed as shown in the figure below.

How to use
How to install
1. Clean the installation floor.

2. Remove the film from the side with the "床面" sticker and wet it with a spray.
*Do not remove the film from the surface to which the sticker is not attached.

3. Lay the mat on the installation floor, and push out water and air with a presser roller, etc. without removing the film, and wipe off any moisture.
*Lay the wetted side down.

4. Remove the surface film and install aluminum slopes at both ends.
The mat and floor can be used after they are dry.
*Guideline: Dry overnight (10~12 hours) without stepping on it.

■ Precautions for use
*Outdoor or direct delivery entrance from outdoors to indoors is not suitable for use because of the effects of heat and ultraviolet rays, which deteriorate the material urethane. Please be sure to use this product for indoor passageways.
*The floor and mats are slippery while wet. Also, do not pass with shoes or tires that are wet with water or oil.
*When a cart passes over the mat, the mat may be damaged if it is turned around on the mat or if the items being transported get caught on it.
*Cannot be installed on uneven surface floor like a concrete. Painted or resin floors are suitable.
(The paint may peel off depending on the installation location, so peel it off slowly from the edge when removing the mat.)
*If you are concerned about the steps between the floor and the mat due to the thickness of the mat, please use an Aluminum slope or an Under-mat.
*Avoid installation on soft PVC or floors that contain a lot of plasticizers.
How to use
Stamp your foot on the mat three times before passing. When the mat becomes dirty, clean it with water or special detergent, referring to the cleaning instructions.
*Please note that the mat is not suitable for use in areas with large or hard, sharp debris as they may damage the mat surface.
How to clean
1. Thoroughly wet the mat with water or special detergent.

2. Wipe with a damp rag or mop to collect dirt.

3. Wipe off any remaining water with a rag or absorbent mop.

Customers' opinions

It contributes to cost savings because it can be used for a longer period of time!
We used to use a peel-off type adhesive mat, which required frequent purchases, but the STEP-MAT have been very helpful because they are still working fine more than two years after installation!
Food manufacturer, Niigata, Japan

It removes dirt from the shoe soles and has an excellent reputation within the company!
We have installed STEP-MAT on the floors inside the air showers in our factories. The material is softer than the peel-off type adhesive mats and removes dirt better, so we are very satisfied with the product, which has been well received within the company and has reduced our costs!

You can feel that dust is being removed!
We were concerned about the dust from raw materials flying around and contaminating the aisles outside the workroom. STEP-MAT sticks to fine powders remarkably well, keeping the outside of the workroom clean without being contaminated by powders of raw materials.
Pharmaceutical manufacturer, Osaka

It’s easy to clean and no more stains or mold!
We had been using a foot washer, but it took a lot of time and effort to maintain, and we were worried about mold and strange odors. The step mats are easy to maintain, stains and mold are removed, and the line of flow is smoother!
Food manufacturer, Saitama, Japan
Delivery record
ASAHI BREWERIES, LTD. / Meiji Co., Ltd. / The Nisshin OilliO Group, Ltd. / Ezaki Glico Co., Ltd. /
Maruha Nichiro Corporation / NH Foods Ltd. / MARUKA FOODS Corporation /
YOKOHAMA MORINAGA MILK INDUSTRY CO., LTD / Ito-Yokado Co., Ltd. / Hakata Salt Co., Ltd. /
TAKAHASHI SAUCE Co., Ltd. / HOYA CORPORATION / POKKA SAPPORO FOOD & BEVERAGE LTD. / Cosmelor Ltd./
LEC, Inc. / Watami Co., Ltd. / UENO FINE CHEMICALS INDUSTRY, LTD. / Nippon Kayaku Co., Ltd.
Lineup

Part Number | Size(mm) | Thickness(mm) | Details |
---|---|---|---|
SM01-11006 | 900×600 | 3.0 | STEP-MAT+Sponge mop+Disinfectant cleaner |
SM01-11007 | 1200×900 | ||
SM01-11008 | 900×600 | 6.0 |

Part Number | Size(mm) | Thickness(mm) | Color |
---|---|---|---|
SM01-11001 | 900×600 | 3.0 | Blue green |
SM01-11002 | 1200×900 | ||
SM01-11003 | 895×450 |

Part Number | Size(mm) | Thickness(mm) | Color |
---|---|---|---|
SM01-11004 | 900×600 | 6.0 | Blue green |
SM01-11005 | 1200×900 |

Part Number | Size(mm) | Thickness(mm) | Color | Surface resistance(Ω) |
---|---|---|---|---|
SM01-11009 | 900×600 | 3.0 | Gray | 10⁹ |
SM01-11010 | 1200×900 |
FAQ





