Washable and reusable adhesive gel that removes dust from fingertips

Tip remover is an adhesive gel that removes dirt and sebum from gloves and fingertips.
You can easily remove dirt from your fingertips by just holding it, and if it gets dirty, you can wash it with water and use it repeatedly.
Ideal for those with the following concerns.

  • ・I use a roller to clean dirt off my gloves, but I want to remove dirt more easily.
  • ・I want to remove dust from my fingertips without stopping the flow of work.
  • We want to show that we are working on foreign material contamination in our audits!

Features

Soft gel fits to fingertips

The hollow structure allows the soft gel to easily fit on your fingertips and remove dust. The shape makes it easy to hold in your hand.

Removal rate test
Removal rate test results Tip remover Tip remover semiconductive type
80% or more 85% or more
Test method: ATP (+AMP) wipe test
Measuring instrument: Kikkoman BioChemifa Lumitester
Compare a rubber glove with dust on the fingertips with a rubber glove after using the Tip remover.
*These results are based on in-house confirmation tests and may not produce similar results.

Can be used repeatedly

When the adhesive strength decreases due to dirt, the dirt can be removed by gently rubbing it under running water, and the adhesive strength will be restored when it dries. It can be used for a long time and does not require maintenance, so the running costs are low.

Number of consecutive uses and dust return from the Tip remover
Test procedure: 1. Put dust on rubber gloves.
2. Hold the tip remover and remove dust from the rubber gloves.
3.
Put dust on rubber gloves again.
4. Repeat steps (1) to (3) to check the number of consecutive uses of the Tip remover and the amount of dust that returns during this time.
*These results are based on in-house confirmation tests and may not produce similar results.

Test method: ATP (+AMP) wipe test
Measuring instrument: Kikkoman BioChemifa Lumitester
The standard value was set at cleanliness level 1490 (red line) when the gloves were washed with hand soap.
Even after 100 consecutive uses, the Tip Remover did not cause dust to return to the rubber gloves, and was able to remove dust so that the rubber gloves were cleaner than the standard value.
The standard value was set at cleanliness level 1490 (red line) when the gloves were washed with hand soap.
Even after 120 consecutive uses, the Tip Remover semiconductive type did not cause dust to return to the rubber gloves, and was able to remove dust so that the rubber gloves were cleaner than the standard value.
Cleanliness by washing with water
Test procedure: Compare the cleanliness of the tip remover before use with that after washing with water and drying it after use.
*These results are based on in-house confirmation tests and may not produce similar results.

Test method: ATP (+AMP) wipe test
Measuring instrument: Kikkoman BioChemifa Lumitester

The cleanliness level was almost the same before use and after washing.

No silicone or plasticizers

Since no silicone or plasticizers are used, there is no risk of transfer of these components. Also, since no adhesive material is used, there is no transfer of glue.

Can be installed with the adhesive power of gel

It does not use adhesive and can be installed anywhere you like, such as on a top surface or wall.

Check out the video

Location of use

It can be used in places where dust on gloves is a concern.
It can be installed not only on workbenches, but also on walls and top surfaces due to the gel’s adhesive strength.

place-tipremover_1

On the wall

On the top surface

Installation location

It is effective when installed as shown in the figure below.

How to use

How to clean

Dirt can be removed by softly rubbing it with the palm of your hand while running water, and the adhesive force will be restored when it dries.

Customers' opinions

It’s easy to remove dirt from your fingertips!

The tip remover is hollow inside, so it is easy to hold with one hand and can easily remove dust and dirt from your fingertips while working. Additionally, when it gets dirty, you can simply wash it off with water and use it repeatedly, and reduce costs!

We can use it without worrying about glue transfer!

We use a peel-off-type roller to remove dirt from my fingertips, and I was worried about glue transferring to them. Tip remover does not use adhesive and is safe to use!

Lineup

Part Number Hardness Size(mm) Color
TR00-14001 Asker C30 Bottom: Φ80
Height: 50
Blue green
Part Number Hardness Size(mm) Color Surface resistance(Ω)
TR01-14002 Asker C30 Bottom: Φ80
Height: 50
Black 10⁹

FAQ

How do you clean it if it gets dirty?
You can remove any dust by gently scrubbing the item with the palm of your hand while running water over it.